Saturday, July 30, 2011

Inner Geeks Reaver Titan Build Pt. 3

The Inner Geek here with another installment of my Reaver Titan project.

As I was trimming and preparing the pieces of the Reaver Titans' legs I thought I would share some tips on working with resin. Of course, the first tip is always safety, never inhale the dust from sanding or grinding this stuff! Next we have the washing which I covered in detail in an earlier post. The following are just a couple more tips in regards to trimming the pieces...

Mold lines. They suck. That's not the tip, just a fact. On resin pieces we want to trim the piece so that there is no line. Easy enough if it is a traditional plastic type of mold line where the piece is one uniform level with the line protruding out from it. But what about when the piece is not uniform and the line is the result of an uneven cast? We still need to get the pieces to match up while trimming the least amount possible. Here is an example of such a mold line.



This a trick I use to help ensure that I trim just enough. I take a sharpie marker and make trace over the line. Make a couple of passes if needed, but get the whole mold line black.



Now you can begin to trim along the mold line. You may use a file or a hobby knife, whichever you are comfortable with. Where the part doesn't need much trimming, the marker will come off quickly. Where marker remains, the part is not even, or flush.



Concentrating on areas where the marker remains, you will see less and less marker as the two sides of the part become more flush. Use common sense here, you may have to trim down areas where the marker has already disappeared to reach the parts where it has not. The idea is to use the marker to help you see where there is more trimming to be done and where the part is already even. The line will eventually disappear completely, but it is not always necessary to go that far. This much marker is acceptable to me for this particular part.



Another thing to remember about resin, it cuts a little funny when you use clippers. Sometimes where the vents (the extra sprue bits colored black below) are you can cut too close and break off a bit of the actual piece. I believe this happens because the resin tends to be weaker in these areas. So, when trimming these large bits I recommend clippers. But, I also recommend trimming different ways according to where vent is located. On a vent like the one below, where the vent is on surface you will see when finished, you do not want to have your clippers flush with the piece. I would leave some space between the clippers and the edge of the piece, then trim the remainder with a knife or file.



For the next piece, you may notice that the vents are on surface I've designated with marker. This surface will be hidden as it's the inside of a joint. The hip joint to be exact. I will put the clippers right against the piece in a situation like this. If a small indention results from the close cut it will never show.



I hope you've enjoyed this quick trip to resin land. I'm sure as this project moves forward there will be more tips and tricks that pop up and I'll be happy to share them all with you. Now I'm just trying to think of a way to stick the legs together to do mock ups for positioning. Some sort of super blu tac may be in order!

Thanks for stopping by. If you have any questions, comments, suggestions, or entertaining insults, by all means leave me a comment!

-Brian
aka The Inner Geek

0 comments:

Post a Comment

Labels

3D Printing (7) 40K Fluff (3) 40K Nation (2) 6th Edition (32) 7th Edition (8) Aaron Lovejoy (2) Accessories (4) Adepticon (10) Adeptus Mechanicus (19) Aetherium (1) Airbrushes (1) Alan Bligh (1) Alpha Legion (9) Analytics (1) Anvil Eight (1) Apocalypse (43) Apocalypse Games (6) Apocalypse World Records (9) Armies (2) Art (2) Astra Militarum (1) Battle Reports (20) Battlefleet Gothic (2) Battlefoam (3) Battlefront Miniatures (1) Betrayal at Calth (7) Big Daddy (1) Black Templars (3) Blood and Skulls Industry (7) Blood Angels (21) Blood Ravens (1) Campaign (1) Chainsword (1) Chaos (18) Chaos Space Marines (35) City Fight (1) Collectors Editions (1) Conquest (2) Conventions (1) Conversions (14) Cosplay (5) Crimson Templars (5) Daemons (4) Dark Angels (29) Dark Eldar (5) Dave Taylor (2) Dawn of War (1) Death Guard (1) Death Korp of Krieg (1) Death Korps of Krieg (2) Dice of War Games (2) Digital Downloads (2) Dreadnoughts (2) Dreamforge (7) Drop Zone Commmander (1) Dust (1) eBay (6) Eldar (33) Emperor's Children (1) Eternal Crusade (1) Events (2) Facebook (1) Fantasy Flight Games (5) FAQ (6) Feast of Blades (1) Fellblade (14) Finecast (2) Flames of War (2) Flash-Gitz (1) Flyers (16) Forge World (394) Fraud (2) Games Workshop (77) Gamesday (1) Garro (1) Giveaways (8) Grey Knights (5) Heresy Trading (1) Hobby Articles (26) Hobby Supplies (1) Horus Heresy (333) Horus Heresy Weekender (31) House Rules (7) Imperial Fists (12) Imperial Guard (25) Imperial Knights (22) Inferno (6) Inquisition (3) interviews (4) Iron Hands (8) Iron Warriors (5) KICKSTARTER (7) Killzone (1) Knight Titans (5) Legal Issues (3) Legio Custodes (21) Legion of the Damned (4) Leviathan Crusader (1) Lord Inquisitor (12) mastadon (1) Mastodon (1) Mechanicum (9) Minotaurs (1) Mobile Devices (1) Moritat (1) Necrons (14) New Releases (4) Night Lords (4) Objective Scoring (2) Orks (28) Painting (4) Plastic 30K Kits (1) Podcasts (1) Primarchs (2) Privateer Press (1) Prospero (3) Raven Guard (8) Ravenguard (1) Resin accessories (108) Retailers (7) Roboute Guilliman (1) Rumors (95) Salamanders (5) Scam Alerts (1) Scratch Builds (24) Siegeworld (5) Sisters of Battle (11) Sisters of Silence (8) SoCal Apocalypse (5) Solar Auxilia (12) Sons of Horus (4) Space Hulk (3) Space Marines (55) Space Wolves (13) Special Ops (1) Starter Set (5) Stormbird (1) Supplements (2) Tactics (1) Tallarn (1) Talons of the Emperor (1) Tau (19) Terrain (15) The Big Game (20) The Big Game 2 (17) The Big Game 3 (14) The Big Game 4 (3) The Black Library (117) The Emperor (1) The Inner Geek (4) Thosand Sons (3) Thousand Sons (15) Thunderhawk (4) Titans (24) Tom McBride (33) Tools (1) Tyranids (13) Ultramarines (12) Video Games (16) Videos (1) Wahammer 40k (3) Warhammer Forge (1) Warhammer World (6) Warhawk (3) Warhound Titan (2) Warlord (16) Warmachine (1) Week in Review (1) White Dwarf (10) White Scars (4) WIP (2) Word Bearers (4) World Eaters (3)

Disclaimers

Apocalypse40K is a registered trademark of Dice of War, Inc.. ©Copyright 20010-2013. All rights reserved.

Warhammer 40,000
This web site is completely unofficial and in no way endorsed by Games Workshop Limited.

Adeptus Astartes, Blood Angels, Bloodquest, Cadian, Catachan, the Chaos devices, Cityfight, the Chaos logo, Citadel, Citadel Device, Codex, Daemonhunters, Dark Angels, Dark Eldar, 'Eavy Metal, Eldar, Eldar symbol devices, Eye of Terror, Fire Warrior, Forge World, Games Workshop, Games Workshop logo, Genestealer, Golden Demon, Gorkamorka, Great Unclean One, Inquisitor, the Inquisitor logo, the Inquisitor device, Inquisitor:Conspiracies, Keeper of Secrets, Khorne, Kroot, Lord of Change, Necron, Nurgle, Ork, Ork skull devices, Sisters of Battle, Slaanesh, Space Hulk, Space Marine, Space Marine chapters, Space Marine chapter logos, Tau, the Tau caste designations, Tyranid, Tyrannid, Tzeentch, Ultramarines, Warhammer, Warhammer 40k Device, White Dwarf, the White Dwarf logo, and all associated marks, names, races, race insignia, characters, vehicles, locations, units, illustrations and images from the Warhammer 40,000 universe are either ®, TM and/or © Copyright Games Workshop Ltd 2000-2008, variably registered in the UK and other countries around the world. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.

Warhammer
This web site is completely unofficial and in no way endorsed by Games Workshop Limited.

The Chaos devices, the Chaos logo, Citadel, Citadel Device, the Double-Headed/Imperial Eagle device, 'Eavy Metal, Forge World, Games Workshop, Games Workshop logo, Golden Demon, Great Unclean One, the Hammer of Sigmar logo, Horned Rat logo, Keeper of Secrets, Khemri, Khorne, Lord of Change, Nurgle, Skaven, the Skaven symbol devices, Slaanesh, Tomb Kings, Trio of Warriors, Twin Tailed Comet Logo, Tzeentch, Warhammer, Warhammer Online, Warhammer World logo, White Dwarf, the White Dwarf logo, and all associated marks, names, races, race insignia, characters, vehicles, locations, units, illustrations and images from the Warhammer world are either ®, TM and/or © Copyright Games Workshop Ltd 2000-2008, variably registered in the UK and other countries around the world. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.


General This web site is completely unofficial and in no way endorsed by Games Workshop Limited.

Adeptus Astartes, Battlefleet Gothic, Black Flame, Black Library, the Black Library logo, BL Publishing, Blood Angels, Bloodquest, Blood Bowl, the Blood Bowl logo, The Blood Bowl Spike Device, Cadian, Catachan, the Chaos device, Cityfight, the Chaos logo, Citadel, Citadel Device, City of the Damned, Codex, Daemonhunters, Dark Angels, Dark Eldar, Dark Future, the Double-Headed/Imperial Eagle device, 'Eavy Metal, Eldar, Eldar symbol devices, Epic, Eye of Terror, Fanatic, the Fanatic logo, the Fanatic II logo, Fire Warrior, Forge World, Games Workshop, Games Workshop logo, Genestealer, Golden Demon, Gorkamorka, Great Unclean One, the Hammer of Sigmar logo, Horned Rat logo, Inferno, Inquisitor, the Inquisitor logo, the Inquisitor device, Inquisitor:Conspiracies, Keeper of Secrets, Khemri, Khorne, Kroot, Lord of Change, Marauder, Mordheim, the Mordheim logo, Necromunda, Necromunda stencil logo, Necromunda Plate logo, Necron, Nurgle, Ork, Ork skull devices, Sisters of Battle, Skaven, the Skaven symbol devices, Slaanesh, Space Hulk, Space Marine, Space Marine chapters, Space Marine chapter logos, Talisman, Tau, the Tau caste designations, Tomb Kings, Trio of Warriors, Twin Tailed Comet Logo, Tyranid, Tyrannid, Tzeentch, Ultramarines, Warhammer, Warhammer Historical, Warhammer Online, Warhammer 40k Device, Warhammer World logo, Warmaster, White Dwarf, the White Dwarf logo, and all associated marks, names, races, race insignia, characters, vehicles, locations, units, illustrations and images from the Blood Bowl game, the Warhammer world, the Talisaman world, and the Warhammer 40,000 universe are either ®, TM and/or © Copyright Games Workshop Ltd 2000-2008, variably registered in the UK and other countries around the world. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.