Sunday, January 22, 2012

Mk I Land Raider conversion - Part II - the conversion

Here is Part II of the article on Tom McBride's Mk I Land Raider conversion.

From Tom McBride:

Since doing this project I was asked a number of times to do a tutorial on how to replace the standard treads with my Liberator Pattern 1.0s (you can also use the same process with the Oppressor or Krusher Pattern 1.0s).  Well I finally got around to building another one (for the same customer no less) and I documented the whole process as best as I could.  So here we go.

First up you want to remove the ridge that runs along the top of the outer track plates of the Land Raider so that you have a flat surface going all the way across.


Also on the outer track plates there is a recessed portion on the angled front portion that needs to be raised up so that it is flush with the rest of the edge.  I did this by gluing a 0.03x0.06 inch strip of plasticard.  I them patched it and cut the grooves in it so that it matched.


Next you need to increase the radius at the front of the track section so that the larger treads can smoothly go around.  I did this by gluing two strips of 0.060x0.125 inch plasticard (or you can use one strip of 0.125x0.125) along the entire front section.  You want to do this on all four track plates.


In order for the wrap around treads to clear along the top of the tank they need to be raised up about a 0.25 inches.  In this case I glued a 0.25x0.10 inch strip of plasticard along the top of all four plates and made it flush with the outer edge of each plate.  I them patched and sanded the joint smooth.  You can then assemble the two track sections (don't forget to install the front access ramp and its opening mechanisms.  The other thing you will want to do is smooth over the sharp edges where the new plasticard meets the model to that the track has a smooth transition.


As there are some different armor layers on the outer track panels along the back I added a few extra piece of plastic to get them to match.  It's not necessary but it a nice touch to get everything to blend together.


At this point you can begin wrapping the treads all the way around the track sections.  I like to start in the very front with a couple of treads and continue along the top and bottom.  In all you will need 39 treads per side.  The Liberator Pattern 1.0 pack comes with 40 treads so you will need two packs all together (if you decide to use the Oppressor or Krusher Pattern 1.0s you will need a 3rd pack as the treads are shorter).  The section I leave to last is the angled area on the rear top of the treads section.  As the treads are a little short you will need to sand this area down until you get the two ends to meet.  Then the tracks are done!


Lastly you assemble the rest of the model.  There will be some tripping to do on the front top plate to remove the part of the tab where there is no longer a slot (if you’re also using the Forgeworld Mk2 kit prepare for a lot of swearing as nothing fits together right).  The last modification is to the top plate.  As the armored plates above the track sections are no longer needed you just need to trim off the two sides and finish the assembly.


Finally you can add new rivets and the like to finish the look.  Then it’s ready for paint!




Hope this all helps :)


Thanks to Tom for putting this article together!  You can find his store, where you can buy his custom resin parts, here.

Alec

3 comments:

TJ Atwell said...

Now that is awesome! Beautiful work!

Sean said...

Gorgeous! Tutorial saved for future reference.

Soverain said...

Hi there ! I'm currently working on the same conversion. I've got a probem : I bought 2 packs of Liberators 1.0 pattern but i can't wrap the all side with 40 treads. When i'm look at your photos, my treads looks smaller than yours. Do you know if the Liberator Pattern has got any changes ?

Thanks !

Post a Comment

Labels

3D Printing (7) 40K Fluff (3) 40K Nation (2) 6th Edition (32) 7th Edition (8) Aaron Lovejoy (2) Accessories (4) Adepticon (10) Adeptus Mechanicus (19) Aetherium (1) Airbrushes (1) Alan Bligh (1) Alpha Legion (9) Analytics (1) Anvil Eight (1) Apocalypse (43) Apocalypse Games (6) Apocalypse World Records (9) Armies (2) Art (2) Astra Militarum (1) Battle Reports (20) Battlefleet Gothic (2) Battlefoam (3) Battlefront Miniatures (1) Betrayal at Calth (7) Big Daddy (1) Black Templars (3) Blood and Skulls Industry (7) Blood Angels (21) Blood Ravens (1) Campaign (1) Chainsword (1) Chaos (18) Chaos Space Marines (35) City Fight (1) Collectors Editions (1) Conquest (2) Conventions (1) Conversions (14) Cosplay (5) Crimson Templars (5) Daemons (4) Dark Angels (29) Dark Eldar (5) Dave Taylor (2) Dawn of War (1) Death Guard (1) Death Korp of Krieg (1) Death Korps of Krieg (2) Dice of War Games (2) Digital Downloads (2) Dreadnoughts (2) Dreamforge (7) Drop Zone Commmander (1) Dust (1) eBay (6) Eldar (33) Emperor's Children (1) Eternal Crusade (1) Events (2) Facebook (1) Fantasy Flight Games (5) FAQ (6) Feast of Blades (1) Fellblade (14) Finecast (2) Flames of War (2) Flash-Gitz (1) Flyers (16) Forge World (394) Fraud (2) Games Workshop (77) Gamesday (1) Garro (1) Giveaways (8) Grey Knights (5) Heresy Trading (1) Hobby Articles (26) Hobby Supplies (1) Horus Heresy (333) Horus Heresy Weekender (31) House Rules (7) Imperial Fists (12) Imperial Guard (25) Imperial Knights (22) Inferno (6) Inquisition (3) interviews (4) Iron Hands (8) Iron Warriors (5) KICKSTARTER (7) Killzone (1) Knight Titans (5) Legal Issues (3) Legio Custodes (21) Legion of the Damned (4) Leviathan Crusader (1) Lord Inquisitor (12) mastadon (1) Mastodon (1) Mechanicum (9) Minotaurs (1) Mobile Devices (1) Moritat (1) Necrons (14) New Releases (4) Night Lords (4) Objective Scoring (2) Orks (28) Painting (4) Plastic 30K Kits (1) Podcasts (1) Primarchs (2) Privateer Press (1) Prospero (3) Raven Guard (8) Ravenguard (1) Resin accessories (108) Retailers (7) Roboute Guilliman (1) Rumors (95) Salamanders (5) Scam Alerts (1) Scratch Builds (24) Siegeworld (5) Sisters of Battle (11) Sisters of Silence (8) SoCal Apocalypse (5) Solar Auxilia (12) Sons of Horus (4) Space Hulk (3) Space Marines (55) Space Wolves (13) Special Ops (1) Starter Set (5) Stormbird (1) Supplements (2) Tactics (1) Tallarn (1) Talons of the Emperor (1) Tau (19) Terrain (15) The Big Game (20) The Big Game 2 (17) The Big Game 3 (14) The Big Game 4 (3) The Black Library (117) The Emperor (1) The Inner Geek (4) Thosand Sons (3) Thousand Sons (15) Thunderhawk (4) Titans (24) Tom McBride (33) Tools (1) Tyranids (13) Ultramarines (12) Video Games (16) Videos (1) Wahammer 40k (3) Warhammer Forge (1) Warhammer World (6) Warhawk (3) Warhound Titan (2) Warlord (16) Warmachine (1) Week in Review (1) White Dwarf (10) White Scars (4) WIP (2) Word Bearers (4) World Eaters (3)

Disclaimers

Apocalypse40K is a registered trademark of Dice of War, Inc.. ©Copyright 20010-2013. All rights reserved.

Warhammer 40,000
This web site is completely unofficial and in no way endorsed by Games Workshop Limited.

Adeptus Astartes, Blood Angels, Bloodquest, Cadian, Catachan, the Chaos devices, Cityfight, the Chaos logo, Citadel, Citadel Device, Codex, Daemonhunters, Dark Angels, Dark Eldar, 'Eavy Metal, Eldar, Eldar symbol devices, Eye of Terror, Fire Warrior, Forge World, Games Workshop, Games Workshop logo, Genestealer, Golden Demon, Gorkamorka, Great Unclean One, Inquisitor, the Inquisitor logo, the Inquisitor device, Inquisitor:Conspiracies, Keeper of Secrets, Khorne, Kroot, Lord of Change, Necron, Nurgle, Ork, Ork skull devices, Sisters of Battle, Slaanesh, Space Hulk, Space Marine, Space Marine chapters, Space Marine chapter logos, Tau, the Tau caste designations, Tyranid, Tyrannid, Tzeentch, Ultramarines, Warhammer, Warhammer 40k Device, White Dwarf, the White Dwarf logo, and all associated marks, names, races, race insignia, characters, vehicles, locations, units, illustrations and images from the Warhammer 40,000 universe are either ®, TM and/or © Copyright Games Workshop Ltd 2000-2008, variably registered in the UK and other countries around the world. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.

Warhammer
This web site is completely unofficial and in no way endorsed by Games Workshop Limited.

The Chaos devices, the Chaos logo, Citadel, Citadel Device, the Double-Headed/Imperial Eagle device, 'Eavy Metal, Forge World, Games Workshop, Games Workshop logo, Golden Demon, Great Unclean One, the Hammer of Sigmar logo, Horned Rat logo, Keeper of Secrets, Khemri, Khorne, Lord of Change, Nurgle, Skaven, the Skaven symbol devices, Slaanesh, Tomb Kings, Trio of Warriors, Twin Tailed Comet Logo, Tzeentch, Warhammer, Warhammer Online, Warhammer World logo, White Dwarf, the White Dwarf logo, and all associated marks, names, races, race insignia, characters, vehicles, locations, units, illustrations and images from the Warhammer world are either ®, TM and/or © Copyright Games Workshop Ltd 2000-2008, variably registered in the UK and other countries around the world. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.


General This web site is completely unofficial and in no way endorsed by Games Workshop Limited.

Adeptus Astartes, Battlefleet Gothic, Black Flame, Black Library, the Black Library logo, BL Publishing, Blood Angels, Bloodquest, Blood Bowl, the Blood Bowl logo, The Blood Bowl Spike Device, Cadian, Catachan, the Chaos device, Cityfight, the Chaos logo, Citadel, Citadel Device, City of the Damned, Codex, Daemonhunters, Dark Angels, Dark Eldar, Dark Future, the Double-Headed/Imperial Eagle device, 'Eavy Metal, Eldar, Eldar symbol devices, Epic, Eye of Terror, Fanatic, the Fanatic logo, the Fanatic II logo, Fire Warrior, Forge World, Games Workshop, Games Workshop logo, Genestealer, Golden Demon, Gorkamorka, Great Unclean One, the Hammer of Sigmar logo, Horned Rat logo, Inferno, Inquisitor, the Inquisitor logo, the Inquisitor device, Inquisitor:Conspiracies, Keeper of Secrets, Khemri, Khorne, Kroot, Lord of Change, Marauder, Mordheim, the Mordheim logo, Necromunda, Necromunda stencil logo, Necromunda Plate logo, Necron, Nurgle, Ork, Ork skull devices, Sisters of Battle, Skaven, the Skaven symbol devices, Slaanesh, Space Hulk, Space Marine, Space Marine chapters, Space Marine chapter logos, Talisman, Tau, the Tau caste designations, Tomb Kings, Trio of Warriors, Twin Tailed Comet Logo, Tyranid, Tyrannid, Tzeentch, Ultramarines, Warhammer, Warhammer Historical, Warhammer Online, Warhammer 40k Device, Warhammer World logo, Warmaster, White Dwarf, the White Dwarf logo, and all associated marks, names, races, race insignia, characters, vehicles, locations, units, illustrations and images from the Blood Bowl game, the Warhammer world, the Talisaman world, and the Warhammer 40,000 universe are either ®, TM and/or © Copyright Games Workshop Ltd 2000-2008, variably registered in the UK and other countries around the world. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.